ResMed AirFit F40 Full Face CPAP Mask Starter Pack – Standard Headgear

Name: ResMed AirFit F40 Full Face CPAP Mask Starter Pack – Standard Headgear
Brand: ResMed
SKU: REC646101
Price: 139.99 GBP
Availability: InStock

ResMedSKU REC646101

Preço

£139⁹⁹

Price shown excludes VAT.

VAT relief available on this product

Eligible customers can claim VAT relief on this product at checkout.

Claim VAT relief I confirm I am chronically sick or disabled and these goods are for my personal or domestic use. I claim relief from VAT.

Quantidade

Preço unitário£139.99

Total£139.99

Pedir orçamento

Atributos principais

Marca: ResMed
Categoria: CPAP Mask
SKU: REC646101
Opções: 2 à escolha

ResMed AirFit F40 Full Face CPAP Mask Starter Pack with Standard Headgear, New

The AirFit F40 is ResMed's ultra compact full face mask, and it works differently from every full face mask that came before it. The cushion seals under the nose rather than over the bridge of it, while still covering the mouth, so therapy continues through a blocked nose and through mouth breathing without anything resting on the nasal bridge at all. This starter pack, reference 64610, supplies the mask with the standard headgear.

That single change addresses the two complaints that end a full face mask trial. Air tracking up into the eyes starts at the nasal bridge, because that is where a conventional full face cushion has to seal across a bony ridge that varies hugely between faces. And the red mark across the bridge of the nose each morning comes from the same contact. The F40 has no seal there, so neither problem arises. For anyone who has given up on an F20 or an F30 because of eye leak or bridge marking, this is the mask to try next rather than another size of the same thing.

The cushion is AdaptiSeal, a soft full silicone seal that conforms as the face moves and the sleeping position changes. QuietAir diffused venting is built into the cushion itself, spreading the exhaled air so it is not directed at a bed partner, with the vent ring available separately as a wear part. The frame is flexible plastic wrapped in soft nylon fabric, sits below the eyes, and has two upper and two lower adjustment points, so tension can be balanced top and bottom instead of being pulled from one strap.

A quick release elbow with a short integral tube connects to the air tubing, so therapy can be stopped and restarted without taking the mask off, and the short tube keeps hose drag off the mask when the sleeper turns over. The whole mask weighs 95.8 g. Cushions are made in small wide, medium and large, and headgear in small, standard and large; this pack carries the standard headgear, with the other two sizes available separately.

References

Reference	64610
Brand	ResMed
Model	AirFit F40 full face mask starter pack
Mask type	Ultra compact full face, seals under the nose and over the mouth
Cushion technology	AdaptiSeal silicone
Headgear supplied	Standard
Cushion references	64630 small wide, 64631 medium, 64632 large
Headgear references	64633 small, 64634 standard, 64635 large
Frame reference	64641
QuietAir vent ring reference	64639
Condition	New

Features

Seals under the nose rather than over the bridge, while still covering the mouth, so nothing rests on the nasal bridge.
Removes the two usual reasons a full face mask trial ends: air tracking into the eyes, and the morning mark across the bridge of the nose.
AdaptiSeal full silicone cushion, conforming as the face moves and the sleeping position changes.
QuietAir diffused venting built into the cushion, spreading exhaled air rather than directing it at a bed partner.
Flexible frame wrapped in soft nylon fabric, sitting below the eyes.
Two upper and two lower headgear adjustment points, so tension is balanced rather than pulled from one strap.
Quick release elbow with a short integral tube, so therapy stops and restarts without removing the mask.
Short tube keeps hose drag off the mask when the sleeper turns over.
95.8 g complete, latex free, carrying UKCA and CE marking, made in Australia.
Three cushion sizes and three headgear sizes made for this mask, so a fit is adjusted rather than abandoned.

Points to note before ordering

Standard headgear only. One standard headgear is supplied. Small, reference 64633, and large, reference 64635, are separate items.
Single patient use. A full face mask is a single patient item and is not to be shared or passed on.
Service life guide. Cushions are typically changed every one to three months, headgear every three to six months and the complete mask every nine to twelve months, sooner where the seal, the vent ring, the straps or the frame show wear. The instructions for use supplied with the mask govern cleaning and service life.

Especificações técnicas

Brand: ResMed
Model: AirFit F40
Reference: 64610
Product type: Ultra compact full face CPAP mask starter pack
Condition: New
Seal position: Under the nose and over the mouth, no seal on the nasal bridge
Cushion technology: AdaptiSeal full silicone
Cushion sizes made: Small wide, medium and large
Cushion sizes supplied: Confirmed before dispatch
Headgear supplied: Standard
Headgear sizes made: Small, standard and large
Headgear adjustment: Two upper and two lower points
Headgear clips: Magnetic
Frame: Flexible plastic with soft nylon fabric covering, sitting below the eyes
Venting: QuietAir diffused, built into the cushion, vent ring reference 64639
Elbow: Quick release, with a short integral tube
Weight: 95.8 g
Latex: Latex free
Marking: UKCA and CE
Country of manufacture: Australia
Magnet contraindication: Applies, see the notice above
Patient use: Single patient