Brand
Philips
Genuine Parts
- UK stock, dispatched from Leeds
All products / CPAP Mask Accessories
Frame for DreamWear CPAP Masks
Price
£4699£120.99Save 61%
Price shown excludes VAT.
VAT relief available on this product
Eligible customers can claim VAT relief on this product at checkout.
Price
£4699£120.99Save 61%
Price shown excludes VAT.
VAT relief available on this product
Eligible customers can claim VAT relief on this product at checkout.
Price
£4699£120.99Save 61%
Price shown excludes VAT.
VAT relief available on this product
Eligible customers can claim VAT relief on this product at checkout.
Price
£4699£120.99Save 61%
Price shown excludes VAT.
VAT relief available on this product
Eligible customers can claim VAT relief on this product at checkout.
VAT relief applied — no VAT will be charged at checkout.
Quantity
Unit price£46.99
Total£46.99
You save£0.00
Frequently bought together
Add the whole set in one go.
Dreamwear Nasal Mask Cushion
£46.99
Elbow for DreamWear CPAP Masks
£14.99
Total for the set
£0.00
Key attributes
- Brand
- Philips
- Category
- CPAP Mask Accessories
- SKU
- FRC2198L02
- Options
- 4 to choose from
Philips Respironics DreamWear Mask Frame, Genuine Spare Part
The DreamWear frame is the hollow silicone body of the mask. Air arrives from the tube at the top of the head, travels down two soft channels either side of the face and meets at the cushion under the nose, which is why there is nothing across the bridge of the nose and nothing in the field of view.
This is a genuine Philips Respironics spare part, supplied on its own in small, medium or large. Any frame size works with any DreamWear cushion, so a frame can be renewed without changing the rest of the mask.
Before fitting the frame
- The frame is part of the air path. It is assembled with a genuine DreamWear cushion and elbow, following the mask user guide, and is not adapted to parts from another mask system.
- The vent that clears exhaled air sits in the elbow, not the frame. Never block, tape over or modify any vent opening.
- Frame size and cushion size are separate choices. Changing frame size does not change the cushion required, and the two are not fitted by matching the labels.
- Where mask leak, pressure marks or discomfort persist after the frame is renewed, the fit is reviewed by the clinical service rather than corrected by tightening the headgear.
Why the frame is the part that wears
On most masks the frame is rigid plastic and the cushion does the work. DreamWear is built the other way round: the frame is soft silicone and hollow, so it is simultaneously the structure that holds the mask on the face and the duct that carries the air. That design is what gets the tube off the face and up to the crown of the head, and it is why the mask suits people who sleep on their side or their front, or who want to read or wear glasses in bed with the mask on.
It also explains why the frame is a wearing part rather than a permanent one. Silicone in daily contact with skin oils gradually loses the slight tackiness that holds a seal, and the arms lose a little of their spring, so the mask drifts and the headgear ends up being tightened to compensate. Tightening is the wrong fix: it presses the cushion harder against the face, marks the skin and often makes the leak worse. Philips sets the renewal interval at three months for that reason, and a frame reaching that point is a cheaper answer than a whole new mask.
Two things are worth knowing before ordering. The hollow arms mean that if one side is compressed against a pillow, the air redirects through the other, so side sleeping does not interrupt therapy, but it also means a split or a crack anywhere in the frame is a leak in the air path rather than a cosmetic fault. And the frame is not a universal part: it fits the DreamWear family only. Anyone with a different Philips mask, or a mask from another manufacturer, needs that manufacturer's own frame.
Key features
Hollow silicone frame, carrying air down both sides of the face to the cushion, so the mask body is the duct and there is no tube crossing the field of view.
Tube connection at the crown of the head, keeping the hose clear of the face and off the pillow, which is what allows side and front sleeping without the tube being pulled.
Dual channel airflow, redirecting through the opposite arm when one side is compressed against a pillow, so therapy continues through a position change rather than pausing.
Soft frame with minimal contact area, following the contours of the face rather than clamping across them, which reduces the pressure points that show as marks in the morning.
Works with every DreamWear cushion type, covering nasal, gel nasal pillow, silicone nasal pillow and full face, so one frame serves whichever cushion the wearer settles on.
Three sizes, small, medium and large, with medium fitting most adults. Sizing follows the distance from the crown of the head to the nose rather than face width.
Assembles without tools, pushing together with the cushion, elbow and headgear, so a frame is renewed in under a minute at the bedside.
Genuine Philips Respironics part, holding the tolerances the cushion seal and the vent flow were designed around, which a copied frame cannot be relied on to do.
Specification limited to what is confirmed
- Frame length figures quoted in an earlier description have been left out. They were given in inches only and do not correspond to the physical size of any DreamWear frame, so they would have misled anyone sizing from them.
- Sizing is done with the manufacturer's DreamWear sizing gauge, or by matching the size marked on an existing frame. The size is printed on the frame itself, next to the connector.
- Part numbers above are confirmed against the pack before dispatch.
Choosing the right size
Medium fits most adults and is the size supplied in most complete DreamWear masks, so a wearer replacing a frame from a boxed mask is usually on medium unless they changed it.
The size is printed on the frame, moulded near the tube connector. Reading it off the frame already in use is quicker and more reliable than measuring.
Frame size is independent of cushion size, so a wearer using a small cushion is not necessarily on a small frame, and changing cushion type does not require a different frame.
Routine care schedule
| Task | Interval |
|---|---|
| Wipe the frame and cushion clean after use | Daily |
| Wash the frame in warm water with a mild detergent, rinse and air dry away from direct sunlight | Weekly |
| Inspect the arms and connector for splits, cracks or hardening | Weekly |
| Renew the frame | Every three months |
| Renew the cushion | To the interval in the mask instructions, typically more often than the frame |
Intervals follow manufacturer guidance and are shortened where the mask is used in a shared or institutional setting.
Technical specifications
- Manufacturer
- Philips Respironics
- Product
- DreamWear mask frame
- Part type
- Genuine spare part
- Condition
- New
- Material
- Silicone. Contains no DEHP
- Sizes
- Small, medium, large
- Part number, small
- 1116745
- Part number, medium
- 1116746
- Part number, large
- 1116747
- Compatible cushions
- DreamWear nasal, gel nasal pillow, silicone nasal pillow and full face
- Air path
- Dual hollow side channels, tube connection at the crown
- Renewal interval
- Every three months, following manufacturer guidance
Specifications can change without notice. Ask us for the current technical file.
What is in the box
- Item
- Detail
- Condition
- DreamWear frame
- Hollow silicone frame in the size selected, with the tube connector at the crown
- NEW
What is not included
- Item
- Detail
- Status
- Cushion
- Nasal, gel nasal pillow, silicone nasal pillow or full face cushion
- SOLD SEPARATELY
- Elbow and swivel connector
- Connects the air tubing at the top of the head and carries the vent
- SOLD SEPARATELY
- Headgear
- Fabric strap assembly that holds the frame in place
- SOLD SEPARATELY
- Complete mask
- This listing is a spare part, not a full mask system
- NOT INCLUDED
Shipping
Ordered before 1pm Monday to Friday, dispatched the same working day from Leeds. Deliveries run Monday to Saturday, never Sunday.
UK mainland, light items: 1 to 2 working days. Heavy and bulky: 2 to 4 working days.
Customs and duties
International orders ship on a Delivered At Place basis. Import duty, local tax and customs clearance fees are charged by the destination country and are the buyer's responsibility.
Warranty
This item is brand new and comes with the manufacturer's warranty.
Returns and refunds
- UK orders: 14-day change of mind. Tell us within 14 days of delivery at info@cpapsupply.co.uk or on +44 780 264 4820 and we send you a returns reference. Return postage is paid by you.
- Unopened and sealed items are refunded in full, including the standard delivery you paid.
- Hygiene items (masks, cushions, nasal pillows, headgear, tubing, filters, chinstraps, water chambers, wipes and anything that touches the airway) cannot be returned once the seal is broken, even if unused.
- Opened machines and devices: up to 40% is deducted if only opened to inspect, and up to the full price if used, as a used medical device can no longer be sold as new.
- Faulty or not as described? Tell us within 30 days for a full refund, and we pay the return postage. After that, it is repaired or replaced under the warranty.
- International orders follow different rules because of customs: see the International Orders section of our policy.
Read the full returns and warranty policy
This does not affect your statutory rights.
Information on this page is provided for guidance and does not replace advice from a qualified clinician. Always read the manufacturer's instructions before use, and check that a device is suitable for the patient and the prescribed therapy.
Ordered with this
Goes on the same order.
Other lines in this category
More in the same category.
Recently viewed
Picking up where you left off.
Keep therapy on track with fresh Accessories & Parts
Next Day Delivery
Orders before 1PM (Mon–Fri)
Global Shipping
Worldwide delivery – trusted carriers